Clover Technologies Group PAC0820 Manual de Instruções

Digital Video Recorder (DVR) 4/8/16 and Channel U s e r M a n u a l

- 10 - 1. YOUR DVR AT A GLANCE Product Overview D1 Model 4CH 8 CH 16 CH Video Format PAL/NTSC Video Compres

- 100 - : indicates that the “VS500” software is downloading ……. When the “ ” process bar is full“＂, the VS500 software has

- 101 - Fig 8 Fig 9 1. PTZ Control: Click + or - to control PT

- 102 - Brand name Model Number Size (GB) Drive Seagate ST3250318AS 250G SATA Seagate ST3320410SV 320GB SATA Seagate ST3320613AS

- 103 - Appendix 4 List of Compatible Portable SATA DVD Recorders(Only for 8CH and 16CH D1 series) Below is the list of tested portable

- 11 - Power Adapter DC 12V 3A AC 220V/12V 5A Operating temperature -10℃~+40℃ Operating humidity 10%~90% Dimensions* (L*W*H) 315x232x57mm

- 12 - Network Protocol TCP-IP/ DHCP/PPPOE/NTP/FTP/ RTSP/ UPNP Network Function Live Monitor, Playback, Configuration, Backup, Mobile Phone

- 13 - Please get acquainted with the parts and accessories as well as the ways to use the appliance as described in this instruction manu

- 14 - Quad Press this button to switch the display modes 1 Channel switch CH1,CH2, CH3,CH4 Using these buttons allows you to choose to ou

- 15 - 10+ Switch above 10+ channels Assistant-（optional） Fn Assistant function: PTZ control and image color. In PTZ menu, shift PTZ contr

- 16 - 11 PTZ-（optional） PTZ Enter PTZ control Mult+Enter Switch output between VGA and CVBS. 12 Combination key-（optional） Mult+ Switch r

- 17 - D1 16 CH（1U） No. Icon No. Icon 1 CVBS output 10 CVBS Input 2 SPOT output 11 Video Loop(9-16CH) 3 Audio output 12 LAN In

- 18 - CIF 8 CH 1 2 4 5 8 11 12 3 6 7 9 10 No. Icon No Ico

- 19 - 1 2 3 4 5 6 7 8 9 10 11 1.

- 2 - CAUTION! RISK OF ELECTRIC SHOCK. PLEASE DO NOT REMOVE COVER WHEN POWER CONNECTED. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO

- 20 - NO-COM) ---- (optional) For connecting to external alarm device RS-485 Connector (pin A-B) ---- (optional) For connecting PTZ camera

- 21 - No. Name Description 1 Alarm reset Clears the alarm input or alarm output status. 2 REC Recording control. Has

- 22 - 3.4 Mouse Control You can use a mouse to operate the DVR as well. The mouse operates just like a mouse on a Windows PC. Please conne

- 23 - 3.5 Hardware Installation It is recommended that the installations described below are carried out by qualified personnel. 3.5.1 Bas

- 24 - Ethernet connector.  USB For connecting the mouse, USB flash drive, USB portable HDD, USB portable DVD Recorder. The USB mouse i

- 25 - 5. Fix the HDD bracket on the DVR HDD bracket 6. Use SATA cable to connect the DVR main board SATA ports, 7. Then connect po

- 26 - 3.5.3 PTZ Control Connections---- (optional) Connect the PTZ control jacks to the corresponding RS485 A and B interfaces on the rear

- 27 - After starting up, videos will be outputted on both VGA (HDMI) and TV, but the menu will only be displayed on one side. There ar

- 28 - to display the main menu. A login window will appear. You can login from the LOGIN window as shown above. Select user name and fill

- 29 - 【View 16】：View sixteen channels in full screen mode 【Mute】：Turn sound on or off See the following subsections for a detailed desc

- 3 - LIMITATION OF LIABILITY  This users’ manual is supplied ‘as is’, with no warranties, be it expressed or implied, including, but not

- 30 - In order to playback a certain video feed from a particular camera, you first need to indicate what time and which camera you wish

- 31 - In the playback view, you can drag an area with your mouse then click this area to zoom out. Options for the playback control pane

- 32 - 3. Click “Backup” to enter into backup interface. Click “Erase” to delete data in your USB disk 4. In backup interface, user ca

- 33 - After searching recorded files; you can choose files check marked “” on right panel and click “” to enter backup interface. Aft

- 34 - Playing backed up video on your PC The backup file will be in DAV format and it can be played by special player (This player wi

- 35 - 【Alarm Type】;There are two types for you to select: Schedule and Manual 【Schedule】; Set Alarm Output when alarm is triggered. Se

- 36 - 1. Directional buttons: Control the direction of the PTZ cruise. Please refer to your PTZ manual for details of PTZ scanning mode. 2

- 37 - User can set two periods to set hue, brightness, contrast and saturation for each channel respectively. 4.2.8 TV Adjustment By pre

- 38 - 4.3 Channel Status Display The top right corner of each channel image features the following status icons: This icon indicates tha

- 39 - Alarm Input Include channel, enable/off, alarm input type, arming time, output time delay, alarm linkage, PTZ linkage, pre-recordi

- 4 -  Please refer all work related to the installation of this product to qualified service personnel or system installers.  Do not op

- 40 - USB Upgrade Upgrade system through USB disk Configuration Export parameters to USB disk or import parameters from USB disk M

- 41 - 5.1.1 Menu Options In order to modify/adjust system configuration, you need to enter the System Menu by pressing the Main Menu butt

- 42 - record type and time in the Schedule interface: Main Menu>> Record>> Schedule. 【Channel】 Select the channel number

- 43 - You can finish setting for one channel and then click save button or you can finish all setup and then click save button to memorize

- 44 - Operation method: 【Channel】select the channel you want to implement motion detection on. 【Enable】enable or disable function. 【

- 45 - from 10 - 300 (second units) 【Alarm output】 when alarm occurs, system enables peripheral alarm devices 【Alarm duration】Alarm ou

- 46 - When someone viciously masks lens, the system can alert you to guarantee video continuity. You can select Alarm output, PTZ Linkage

- 47 - 【Alarm duration】 During camera masking, the system auto delays detecting for a specified time. The value ranges from 10 - 300 (seco

- 48 - you can copy the setting to other days. 【Alarm output】: When video lost occurs, system enables peripheral alarm devices 【Alarm du

- 49 - 【Alarm input】Select alarm channel number 【Enable】Enable function switch 【Type】Normal open or Normal close (According to your al

- 5 -  Do not expose the appliance to water or moisture, nor try to operate it in wet areas. Do not install the unit in an area where cond

- 50 - 5.3.5 Alarm Output You can set alarm type and get information about alarm output in the alarm output interface: Main Menu> >Al

- 51 - 【Alarm output】 When exception occurs, system enables peripheral alarm devices 【Alarm duration】 System auto delays for a specifie

- 52 - 【System Time】 Adjust the current date and time of the DVR. 【Date Format】 Toggle data format among “yyyymmdd”, “ddmmyyyy” and “mm

- 53 - 【Channel】 Select channel number 【Compression】H.264 【Resolution】D1, HD1, CIF---Please take the actual machine model as quasi

- 54 - 【IP Address】Your DVR supports several methods of viewing online. No matter which method is used, your DVR must first acquire an IP

- 55 - introduction of some important functions. Note: You should enable the relevant function with √ before setup. 【Email】Double clicking

- 56 - 【DDNS】In order to connect your DVR to the internet, you may choose to use the services of a Dynamic DNS. Your DVR comes with sever

- 57 - 5.4.4 Display Setting You can configure display parameters in this interface: Main Menu>> Setting> >Display 【Chann

- 58 - 【Channel Display】Set position for channel name. 5.4.5 Account Setting You can manage users in this interface: Main Menu>> Se

- 59 - 【Modify Group】In this interface, you can edit group name, set memo and set permissions for the group. 【Modify Password】you can s

- 6 - Table of Contents LIMITATION OF LIABILITY...

- 60 - 【Add User】You can add new users and set password, group and authority. 【Add Group】You can add new group and set its permission.

- 61 - 【Delete User】SelectauserandClick this Delete User to delete it. 5.4.6 PTZ Setting You can configure PTZ parameters in this inte

- 62 - 5.4.7 RS232 There are various devices for you to select. Console is for serial port or min-end platform to upgrade program. Keyboard

- 63 - 【Type】 Select display mode of tour: General and Spot—Please take the actual machine model as quasi. 【Split】Set tour split mode 【En

- 64 - If 2pcs of HDD are installed, they will be displayed as 1-2 in HDD. If selecting the first HDD, it displays current type, total cap

- 65 - Export: Connect to the USB interface on the rear panel with the USB equipment, set the system output into a file named cfg.coi Impo

- 66 - 5.5.6 Shut Down In this interface, you can logout of system, shut down machine, restart system and switch users: Main Menu>>A

- 67 - 5.6.1 HDD Information In this interface, you can get information about HDD: Main menu>>Information >> HDD Information.

- 68 - After system starts, if there is conflict, it will jump to the HDD information page immediately. User can check the system time and

- 69 - Select start time and end time, then click search button. You can view the log files. Please page up/down button to view if there a

- 7 - 5. DVR SETTINGS ...

- 70 - Software ~ Windows XP ~ WindowsVista/winodws7 ~ DirectX 9.0c (above) RESTRICTION CONDITION： To ensure PC’s stable visiting of DVR

- 71 - Set the ActiveX control and pluggable unit. Select the following options √ ActiveX control auto-prompting √ Run the script of the

- 72 - Step 1: Right click on “Network neighborhood” and click “Attribute” in the ejected menu to open the “Network connection”. Step 2:

- 73 - Step 5: Examine the IP address, subnet mask, and default gateway on the PC. Step 6: Set the corresponding IP address, subnet mas

- 74 - Fill in your username, password and select English to enter the system. The password is the same as the one set in DVR. USER Name:

- 75 - 6.5.2 Connect cameras In the previous fig, users can click on the left panel to connect to any camera or click “Open All” to connect

- 76 - : Display image in single-screen mode. : Display image in 4-screen mode. : Display image in 6-screen mode. : Display image in 8-scre

- 77 - : Click this icon to move image to right hand. : Click this icon to move image to up. : Click this icon to zoom in. : Click this ico

- 78 - 6.6 Record Query Select recorded type, start time, end time, recorded channel, then click “Query” to search file. In the list belo

- 79 - Alarm Type: Select any alarm type depending on your demand. Operation: Set operation mode when alarm triggered. Alarm Sound: Set a

- 8 - 6.5 OPERATION INTERFACE...

- 80 - 8.2 System Setting 6.8.2.1 General Setting General interface is shown as below.  System time: To modify system time. Please click

- 81 -  Channel: Select a channel.  Encode Format: H.264;  Data stream: Sub stream;  AV enable: Video/Audio. System only display

- 82 -  Period: There are six periods for you to set. Please click set button of the corresponding period. Please note all the setup here

- 83 - 6.8.3.2 DNS Setting Domain Name Server (DNS). These values depend on your actual account; please contact your Internet Service Provi

- 84 - 6.8.4 Alarm Setting User can set alarm input, alarm output, video detect and exception deal. There are introduction of the main fu

- 85 - 6.8.5 Advanced Option User can manage HDD, Upgrade system, Control Record, Manage Accounts and Configure Tour.

- 86 - 6.9 About You will find the web control version, NET SDK and Play SDK. 6.10 Logout Click “Logout” to log out of system. 7. Mob

- 87 - In the ensuing screen, input the user name (default is Admin), password, device port (TCP port), and IP address for your DVR (Serve

- 88 - will switch to “Focus” or “Iris” Login: Click it to enter setting interface. Camera: Click it to enter camera selecting interface. F

- 89 - （4） After selecting “Ok” on last sample image displayed above, the software will start to install. After installation, the

- 9 - APPENDIX 5 LIMITED 1YEAR WARRANTY ...103 APPENDIX 6 HO

- 90 - : Click or to control PTZ direction upward or downward. If you click on “UP/Down”, it will switch to “Left/Down” and you can con

- 91 - Device IP: DVR IP address; Device Port: TCP port (34567 by defaulted) Username: Login User Name (Admin) Password: Password (88

- 92 - 4. Before installing, open the BlackBerry Desktop Manager. As displayed below (see red marking) on Fig 1, this means the phone is no

- 93 - 5. Click on “Application Loader” to enter the interface. In this screen you have two options to select from. Select “Add/Remove App

- 94 - application where you saved the application files. Make sure you saved both the “.alx” file and “.cod” file in the same folder. A

- 95 - 10. Click “Finish” to start software installation. After installation, an interface will be displayed as follows. 2) System exp

- 96 - ② System login interface Open the main interface, see the configure interface bellow. Modify your parameters as necessary. Device

- 97 - on “UP/Down”, it will switch to “Left/Down”, you can control direction to left or right hand. : Click or to adjust relevant para

- 98 - ① Click“ ＂button and search for “VS500”. It is a free application. Fig 2 ② Click “” an

- 99 - your Apple account password, then click “ ”. The screen will look like the one shown in Fig 6. Fig